Silicone Rubber Compressor Crankcase Heater Heating Belt Strip

Working environment temperature of designed air-conditioner compressor is about 4° C While surround environment temperature is bellow zero air conditioner is hard to make enough heat to meet the requirement.

In situation, a subsidiary electric heater is necessarily used at end of central air-conditioner to make the supplementary heat. Our subsidiary electric heater series are the most suitable and ideal heating source designed and manufacture for this appliance, moreover, our subsidiary heater series do not need any other subsidiary equipment. They have such many obvious advantage as being easy in installing, safe in operating and maintenance.

Applied insertion to rated voltage bellow 450v,50-60HZ, related humidity≤90%. Diffuse heat after conducting at electricity in an environment temperature of -30°C-+50°C.It is generally used in central air conditioner compressor. It is also applied in cold area, and oil tube.

Picture for install on the crankcase

Insulation resistance: after putting the whole tube in water for 24 hours, insulation resistance≥1000Mohm

Dielectric test of AC1800V/1Min, no flashover happened

leakage current in working temperature≤0.1mA

power deviation:±7% at rated voltage

REMARK: The products will be 100-percent inspection when the product is finished.

Description

How to order

1.Tell us the length of heating belt or tell us the diameter of compressor or crankcase 

2.Tell us the power,we will design the width for you. 

3.Tell us the length of lead wire

4.You can choose the color, Red/black/White/blue/yellow

Drawing show

The width of 2-core heating belt is 14mm, and the Max. Power is 100W/Meter

The width of 4-core heating belt is 20mm,25mm and 30mm, and the Max. Power is 150W/Meter

We can send the sample to you for free. you can test our quality!!